A28H thread safety valve is suitable for equipment or pipelines with air, steam, water, nitrogen and hydrogen mixture and other media with operating temperature ≤200ºC. A28Y-P/10R8 thread safety valve is suitable for equipment or pipelines with corrosive media with operating temperature ≤200ºC as an overpressure protection device
Safety valve model: A28H |
Nominal diameter of safety valve: 15MM-80MM |
The operating pressure of the safety valve: 1.6MPA-4.0MPA |
Connection mode of safety valve: external thread connection |
Safety valve form: spring type |
The main function of the safety valve: pressure relief protection |
The medium used in the safety valve: steam |
Safety valve material: cast steel. Stainless steel |
Safety valve standard: mechanical ministry standard or custom non-standard |
Screw safety valve main parts materials
NO. |
Part name |
A28H material |
A28Y-P material |
A28Y-R8 material |
1 |
Valve body |
HT200 |
ZG1Cr18Ni9Ti |
CF8M |
2 |
Valve seat |
35 |
ZG1Cr18Ni9Ti |
CF8M |
3 |
Adjusting ring |
2Cr13 |
1Cr18Ni9Ti |
316 |
4 |
Valve clack |
2Cr13 |
1Cr18Ni9Ti |
316 |
5 |
Spring |
50CrVA |
50CrVA coated with fluoroplastic |
50CrVA is coated with fluoroplastic |
6 |
Stem |
2Cr13 |
2Cr13 |
316 |
7 |
Adjusting the screw |
45 |
2Cr13 |
316 |
8 |
Protective cover |
ZG200-400 |
ZG200-400 |
CF8M |
|
Sealing surface material |
Surfacing D507 |
Surfacing Co based cemented carbide |
Screw safety valve dimensions and connection dimensions
Nominal diameter |
Dimensions |
do |
Rc |
G |
L |
L1 |
H |
15 |
10 |
1/2" |
3/4" |
37 |
62 |
189 |
20 |
12 |
3/4" |
1" |
40 |
65 |
196 |
25 |
15 |
1" |
1 1/4" |
45 |
72 |
277 |
32 |
20 |
1 1/4" |
1 1/2" |
55 |
85 |
312 |
40 |
25 |
1 1/2" |
2. "" |
67 |
100 |
322 |
50 |
32 |
2. "" |
2 1/2" |
76 |
112 |
348 |
65 |
40 |
2 1/2" |
3" |
110 |
135 |
370 |
80 |
60 |
3" |
4" |
110 |
145 |
410 |
Safety valve order main mattersSafety valve medium, pressure level, opening mode (full opening/micro opening) set the take-off pressure, determine the valve size, connection mode, standard maximum temperature resistance, release flow/hour, valve body material, internal valve body structure, working principle, installation instructions and other related technical data. Safety valve selection is mainly based on (take-off pressure and neat pressure flow temperature) caliber general design institute will be given, and in fact through the steam pressure, flow and take-off pressure, you can infer the size of the safety valve. Generally, it will be smaller than the caliber selected by the design institute. When the occasion is very important or the environment is more complex, please try your best to provide design drawings and detailed parameters, by our Xuan Cheng valve company experts for your review.
Related safety valve series |
|
|
|
|
Spring micro-lift safety valve |
Stainless steel high pressure safety valve |
High pressure full lift safety valve |
Spring open steam safety valve |
Spring micro full lift safety valve |
Liquefied gas safety valve |
Double safety valve |
Parallel safety return valve |
Pilot operated safety valve |
Spring external thread safety valve |
Spring external thread micro-open safety valve |
Air compressor safety valve |
Steam safety valve with external thread |
Welded high pressure safety valve |
Safety relief valve |
High temperature and high pressure relief valve |
Double lever safety valve |
Safety valve with radiator |
Single lever safety valve |
High temperature and high pressure main safety valve |
Hydraulic relief valve |
Stainless steel vacuum negative pressure safety valve |
Spring-loaded steam safety valve |
Full lift super high pressure safety valve |
|
After-sales service commitmentFor your company in Xuan Cheng valve order valve products, our factory in the after-sales service to make the following commitments: First, our company implements three guarantees for product quality, namely: warranty, replacement, warranty; 2. After signing the contract, ensure quality, quantity and delivery on time; Third, the company to ensure that the valve products provided to meet the contract indicators For the technical consultation of the demander, we will provide answers at any time; 5. When delivering the equipment, the factory shall deliver the following materials to the demander: shipping list, product certificate, product sample, product instruction manual and technical data; When receiving the letter or phone call of the user's response to the quality problem, we guarantee to reply within 24 hours to solve the problem as soon as possible.
|
|
|