Media: | Water |
---|---|
Temperature: | High Temperature |
Actuator: | Electric |
Connection: | Flanged Diaphragm Valve |
Material: | Cast Steel |
Structure: | Roof Type Diaphragm Valve |
Customization: |
---|
Suppliers with verified business licenses
GJ41X cast iron pipe clamp valve details: |
Cast iron pipe clamp valve product introduction: GJ41X type cast iron pipe clamp valve is suitable for internal and external acid etching environment, to maintain normal work. Eliminate internal leakage and external leakage, convenient slot cleaning work, practice has proved that it replaces stainless steel clamps, ending the use of ball valve plug valve or other valve history. Its structure and working principle are the same as the above pipe clamp valve. Structure and working principle: 1 Structure: the valve is composed of left and right valve body, rubber tube sleeve, size valve stem, upper and lower gate, guide post and other parts. 2 Working principle: When turning the hand wheel, make the size of the valve stem drive the upper and lower ram at the same time, compress the tube sleeve, and close, reverse the line open, so that the ram reciprocates between the guide column to complete the valve opening and closing work. In addition, because of the rubber tube sleeve bearing force, so in the switch, the operator rotation of the handwheel as long as the right amount of conflict, have reached the opening and closing pole, do not try or more people to assist, disable other tools to open and close. Cast iron pipe clamp valve installation and maintenance: extend to the electric contact slot and then use copper wire or stainless steel hoop to tighten the two ends. The size of the pipe clamp valve produced by the factory meets the standards of the Ministry of Machinery Industry. After testing before leaving the factory, 10Kg/cm2 lasts for 5 minutes without leakage, and there is no need to disassemble, adjust and change during installation. 2 The valve in the pipeline arbitrary installation, no media flow restrictions, long-term use, such as wear or leakage only need to remove the valve body, replace the new tube sleeve, the valve body can be used, the economy is indeed affordable. The main dimensions:
|
Suppliers with verified business licenses