Kt45f Pulp Exhaust Valve

• Type: Compound Exhaust Valve
• Material: Stainless Steel Cast Steel Brass
• Certification: RoHS, CE, ISO9001, TS16949, TUV, GS
• Transport Package: Wooden Box
• Specification: DN15-DN800
• Trademark: XC
• Model NO.: KT45F
• Origin: China
• HS Code: 3917400000
• Production Capacity: 9999

Product Description

First, product introduction
KT45F pulp exhaust valve is a pulp pipe automatic exhaust valve composed of valve body, valve cover, exhaust hood and sealing assembly, etc. It not only drains the accumulated air in the normal operation of the pipeline or the pulp pump starting process, maintains the flow capacity of the pipeline and prevents the pump water hammer, but also when the pipeline appears negative pressure, it can suck air into the pipeline and buffer the water column. Reduce the pressure of the water hammer to prevent and avoid the damage of the pipeline.
Second, product details
Exhaust valve is mainly used for all kinds of solid materials, slurry conveying pipeline and other kinds of fluid pipeline automatic inlet and exhaust device, can avoid the gas resistance, vibration and water hammer caused by pipeline accumulation, eliminate the negative pressure caused by the local pipe section due to stop pumping, pipeline empouting and other reasons, is an important equipment to protect the safe operation of the pipeline.
The installation position of the exhaust valve directly affects the exhaust effect and the operating state of the pipeline. Designers in the design, often limited to the local highest point, the installation position of the exhaust valve has a variety of, only for the whole pipeline comprehensive consideration, in order to achieve the best exhaust effect. The common installation site has the following positions: the local highest point, the falling slope becomes larger, the rising slope becomes smaller, and the long distance without breaking point rising or falling pipe section. In addition, an exhaust valve needs to be installed every 500 ~ 1000m. When installing the exhaust valve, it is best to install it together with the partition valve, so that when the exhaust valve needs to be removed for maintenance, it can ensure the sealing of the system and the water will not flow out.
Three, the main features of the product
1, the main body material is GGG50 ductile iron.
2, the manufacturer should clearly mark the float slightly less than the density of water, 0.95Kg/m3. The float is made of high density polyethylene to avoid corrosion.
3. The exhaust gasket of air valve is made of ethylene propylene rubber (EPDM).
4. The trace exhaust hole and its path are made of 316 stainless steel to avoid corrosion and biofilm production.
5. The interior and exterior of the air valve are sprayed with polyester baking paint.
6. The buffer piece is made of light metal material.
7. Pressure rating is 1.6Mpa.
Pulp exhaust valve KT45F pulp pipeline automatic exhaust valve/pulp pipeline automatic exhaust valve/pulp pipeline automatic exhaust valve/pulp pipeline exhaust valve/stainless steel pulp exhaust valve is a pulp pipeline automatic exhaust valve composed of valve body, valve cover, exhaust hood and sealing components, which not only in the normal operation of the pipeline or pulp pump startup process to discharge the accumulated air, Maintain the flow capacity of the pipeline and prevent the start of the pump water hammer, and when the pipeline appears negative pressure, it can suck air into the pipeline, buffer the water column and then bridge, reduce the pressure of the water hammer, prevent and avoid the damage of the pipeline. Mainly used for all kinds of solid materials, slurry conveying pipelines and other kinds of fluid pipeline automatic inlet and exhaust device, can avoid the gas resistance, vibration and water hammer caused by pipeline accumulation, eliminate the local pipe section due to stop pumping, pipeline empouting and other reasons produced by the negative pressure, is an important equipment to protect the safe operation of pipelines.