Temperature: | Ordinary Temperature |
---|---|
Certification: | GS |
Media: | Gas, Oil, Water, Acid |
Standard: | Standard |
Connection Mode: | Flange |
Power: | Manual |
Customization: |
---|
Suppliers with verified business licenses
Category | Flow, Temperature Combination Valve (temperature increase valve close) | |||
Control liquid temperature | Control liquid or gas temperature | |||
Hard seal | Soft seal | Hard seal | Soft seal | |
Model number | V130D05T06 | V131D05T06 | V130D05T17 | V131D05T17 |
Nominal diameter DN | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | |
Rated flow coefficient Kvs | 4 | 6.3 | 8 | 16 | 20 | 32 | 50 | 80 | 125 | 160 | 280 | |
Under effective pressure * Large flow rate (m3/h) * |
0.02 MPa | 1.5 | 2.5 | 3.5 | 5.5 | 9.0 | 14 | 22 | 36 | 55 | 70 | 125 |
0.05 MPa | 2.5 | 3.5 | 5.5 | 9.0 | 12 | 22 | 36 | 55 | 85 | 110 | 180 | |
Nominal pressure (MPa) | 1.6; 4.0 | |||||||||||
* High operating temperature (° C) | 140 or less | |||||||||||
Hard seal with isolation tank ≤200 | 400 or less | |||||||||||
Force balancing element | Bellows | Rolling diaphragm | ||||||||||
Flange standard | ANSI JIS DIN GB JB(special can be supplied by user) | |||||||||||
Valve body material | Cast iron; Cast steel; Cast stainless steel | |||||||||||
Spool material | Stainless steel, soft seal for stainless steel inlay rubber ring | |||||||||||
* High working pressure | Nominal pressure (note △Pmx and the relationship between working pressure and working temperature) |
Effective area (cm2) | 250 | 630 |
Effective pressure (MPa) | 0.02; 0.05 | |
Allow * large pressure difference (MPa) between upper and lower membrane chambers | 0.4 | 0.15 |
material | Film cover: steel galvanized; Diaphragm: EPDM or FKM clip fiber | |
Control lines, joints | Copper or steel pipe 10x1; Jacketed type joint R1/4" |
Actuator type number | T06 | T17 |
Temperature setting range (C) | -20 to 50 20 to 90 40 to 110 60 to 130 | |
Special temperature setting (° C) | 110 ~ 180 180 ~ 250 | |
Overtemperature protection | Exceed the set value within 100 ° C | |
Time constant (S) | 15 | 20 |
Warm bag material | Nickel plated copper | |
Capillary length (m) | 5,10,15 (available on user request) |
Allowable leakage (under specified test conditions) |
Hard seal | 4 x 10-4 valve rated capacity | ||
Soft seal | DN15 to 50 | DN65 to 125 | DN150 | |
10 bubbles /min | 20 bubbles /min | 40 bubbles /min |
Nominal diameter DN | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | |
* Large allowable pressure difference △P(MPa) |
PN16 | 1.6 | 1.5 | 0.5 | ||||||||
PN40 | 2.0 |
Suppliers with verified business licenses