CS41h Free Float Type Steam Trap

• Media: Water-Oil Vapor
• Certification: CCC, RoHS, ISO, CE
• Pressure: High and Low Pressure
• Temperature: High and Low Temperature
• Connection: Flange
• Material: Stainless Steel Cast Steel Brass
• Model NO.: CS41H
• Type: Thermostatic
• Transport Package: Wooden Box
• Specification: DN15-DN800
• Trademark: XC
• Origin: China
• HS Code: 8479902000
• Production Capacity: 9999

Product Description

Product introduction

Free float type steam trap is one of the most advanced steam trap in China. The product technical quality and manufacturing process have reached the level of similar products in the world. Due to the high accuracy of the float ball, it can ensure the sealing performance of the trap, and the whole sphere can be the sealing surface with a long service life. The unique advantage of free float type steam trap is that the built-in exhaust valve is selected, which is very sensitive and has high working quality, and can extend the overall service life of free float type steam trap. The biggest advantage of the free float trap is that it is not affected by the fluctuation of pressure, temperature and condensate flow, continuous drainage, water is drained, the minimum undercooling degree is 0ºC, which can make the heating equipment achieve the best work efficiency; Its minimum working pressure is 0.01Mpa, and the maximum back pressure rate is less than 85%.
The product is the petroleum, chemical, printing and dyeing, pharmaceutical, paper making, food and other industrial heating equipment the most ideal trap.

Specification parameters

Nominal diameter (DN) : 15-150;
Nominal pressure (PN) : 1.6-4.0Mpa;
Maximum working pressure (PMO) : 0.2-1.6Mpa;
Maximum working temperature (TMO) : 350 ºC;
Working medium: steam condensate;
No load leakage rate is less than 3%;
And 0.5 percent supercooling

How it works

Free float type steam trap structure is simple, there is only one fine grinding stainless steel hollow float ball inside, both the float and the opening and closing parts, no vulnerable parts, long service life. When the device is just started, there is air and low temperature condensate water in the pipeline, the manual air exhaust valve can quickly eliminate non-condensing gas, the trap begins to enter the working state, the low temperature condensing water into the trap, the condensate level rises, the float rises, and the valve is opened. The device quickly raises the temperature, before the temperature in the pipeline rises to the saturation temperature, the automatic air exhaust valve has been closed; The device enters the normal operation condition, the condensate water decreases, the liquid level drops, and the float rises and falls with the liquid level to adjust the flow rate of the valve hole; When the condensate stops entering, the float approaches the valve seat with the flow of the medium, and the valve is closed. The valve seat of the free float type steam trap is always below the liquid level, forming a water seal without steam leakage.

Installation and use

1. The float trap must be cleaned before installation to remove debris.
2. The trap should be installed horizontally, and the pipe before the trap should slope down to the direction of the trap to avoid steam lock, and the flow direction indicated on the valve body must be consistent with the flow direction of condensate in the pipeline.
3, when the valve is installed, it should be as close as possible to the heating equipment, and the pipe diameter should not be less than the nominal diameter of the valve.
4, the valve should be installed at the end of the steam pipeline, the lowest point.
5, in the whole device, each equipment is installed trap, respectively discharge condensate, so as not to produce steam resistance phenomenon, affect the heating effect.
6. If the steam is stopped for a long time, the water in the trap body should be discharged by the screw plug hole at the lower end of the valve body.
7, in each trap before and after to install the door, should be used gate valve, in order to facilitate the maintenance of the trap used.