Temperature: | Ordinary Temperature |
---|---|
Certification: | GS |
Media: | Gas, Oil, Water, Acid |
Standard: | Standard |
Connection Mode: | Flange |
Power: | Manual |
Customization: |
---|
Suppliers with verified business licenses
Categories | Straight Stroke | Corner stroke | ||
Room temperature type | Medium temperature type | Room temperature type | Medium temperature type | |
Model number | ZDLW-6B(K) | ZDLW-6B(K)G | ZDRW-6B(K) | ZDRW-6B(K)G |
Specifications | DN600 ~ 1000 | DN50 to 1000 |
Nominal diameter mm | 50 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | seven hundred | 800 | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 |
Rated flow factor kv | 85 | 225 | 340 | 500 | 770 | 1360 | 2130 | 3060 | 4160 | 5450 | 6900 | 8500 | 12200 | 16600 | 21700 | 34000 | 49000 | 66600 | 87000 | 110000 | 136000 |
Can be equipped with electric actuator | 3610, DKJ, CH, UNIC, PSQ, HQ, DHL and other series electronic electric actuator | ||||||||||||||||||||
Nominal pressure | 0.1, 0.6, 1.0 (MPa) | ||||||||||||||||||||
Medium temperature ° C | Room temperature -20ºC ~ +200 (cast iron), -40 ~ +450 (cast steel), medium temperature -40 ~ +450 (cast stainless steel) | ||||||||||||||||||||
Angle range | Parallel ram 0 ~ 700, inclined valve plate 0 ~ 600 | ||||||||||||||||||||
Flow characteristics | Approximate ratio | ||||||||||||||||||||
Nozzle flange | Press JB78-59 middle clamp flange for connection | ||||||||||||||||||||
Action time | 25, 30, 60 seconds | ||||||||||||||||||||
Body material | Ht200, 35, ZG230-450, 1Cr18Ni9, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti |
Nominal diameter mm | 50 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | seven hundred | 800 | 900 | 1000 |
Nominal pressure MPa | 0.6 | ||||||||||||||||
Medium temperature ° C | Room temperature: -20 ~ 200 (cast iron); -40 ~ 250 (cast steel); Medium temperature -40 to 450 (cast stainless steel) | ||||||||||||||||
Rated Angle ° | 0 to 70 | ||||||||||||||||
Flow characteristics | -20 to 150 | ||||||||||||||||
Ambient temperature ° C | Approximate equal ratio | ||||||||||||||||
Nozzle flange | Press JB78-59 for splint flange connection | ||||||||||||||||
Body material | HT200; 35; ZG230-450; 1Cr18Ni9; ZG1Cr18Ni9Ti | ||||||||||||||||
Valve sheet material | HT200; 35; ZG230-450; 1Cr18Ni9; ZG1Cr18Ni9Ti |
Type No. | Output torque N.m | Action time S/90° | Corner | Technical parameters |
361RSA-02 | 20 | 8.5 | 90 ° | Power source: 220±10%Va.c.50Hz Drive motor: AC reversible motor Input signal: 1-5V d.c.4-20mA d.c.(shielded line for signal line) Opening signal: 4-20mA d.c. Protection level: equivalent IP55 explosion-proof mark: ExdBT4 |
361RSA-05 | 50 | 17.0 | ||
361RSB-10 | 100 | 18.0 | ||
361RSB-20 | 200 | 36.0 | ||
361RSC-30 | 300 | 24.0 | ||
361RSC-50 | 500 | 42.0 | ||
361RSC-60 | 600 | 48.0 | ||
361RSD-100 | 1000 | 30.0 | ||
361RSD-150 | 1500 | 42.0 | ||
361RXB-10 | 100 | 18.0 | ||
361RXB-20 | 200 | 36.0 |
Part name | Materials | Temperature range ° C |
Valve body, valve plate | HT200 | -20 to 200 |
35 | -40 to 450 | |
ZG230-450 | ||
1Cr18Ni9Ti | ||
ZG1Cr18Ni9Ti | ||
ZG0Cr18Ni12Mo2Ti | -40 ~ 550 |
Items | Index value |
Base error % | + / - 2.5 |
Return difference % | 2.0 |
Dead zone % | 3.0 |
Start and end point deviation % | + / - 2.5 |
Frontal alignment deviation % | + 2.5 |
Allowable leakage of 1/h | 2 x 10-2 x rated valve capacity |
Nominal diameter mm | Fitting actuator model | |||||||||||||||||
361RSA-05 | 361RSB-10361RXB-10 | 361RSB-20361RXB-20 | 361RSC-30 | 361RSC-50 | 361RSC-60 | 361LSC-99 | 361RSD-100 | 361RSD-150 | ||||||||||
0 ° | 70 ° | 0 ° | 70 ° | 0 ° | 70 ° | 0 ° | 70 ° | 0 ° | 70 ° | 0 ° | 70 ° | 0 ° | 70 ° | 0 ° | 70 ° | 0 ° | 70 ° | |
50 | 0.6 | 0.6 | ||||||||||||||||
80 | 0.6 | 0.6 | ||||||||||||||||
100 | 0.6 | 0.284 | ||||||||||||||||
125 | 0.6 | 0.144 | 0.6 | 0.292 | 0.6 | 0.587 | ||||||||||||
150 | 0.6 | 0.084 | 0.6 | 0.17 | 0.6 | 0.342 | ||||||||||||
200 | 0.6 | 0.035 | 0.6 | 0.071 | 0.6 | 0.144 | ||||||||||||
250 | 0.6 | 0.037 | 0.6 | 0.074 | 0.6 | 0.112 | ||||||||||||
300 | 0.6 | 0.021 | 0.6 | 0.043 | 0.6 | 0.064 | ||||||||||||
350 | 0.6 | 0.013 | 0.6 | 0.027 | 0.6 | 0.041 | ||||||||||||
400 | 0.6 | 0.027 | 0.6 | 0.045 | 0.6 | 0.055 | ||||||||||||
450 | 0.6 | 0.019 | 0.6 | 0.032 | 0.6 | 0.038 | ||||||||||||
500 | 0.6 | 0.014 | 0.6 | 0.023 | 0.6 | 0.028 | ||||||||||||
600 | 0.6 | 0.013 | 0.6 | 0.027 | 0.6 | 0.041 | ||||||||||||
seven hundred | 0.6 | 0.008 | 0.6 | 0.017 | 0.6 | 0.025 | ||||||||||||
800 | 0.6 | 0.005 | 0.6 | 0.012 | 0.6 | 0.017 | ||||||||||||
900 | 0.6 | 0.004 | 0.6 | 0.008 | 0.6 | 0.012 | ||||||||||||
1000 | 0.6 | 0.003 | 0.6 | 0.006 | 0.6 | 0.009 | ||||||||||||
Action time S/70° | 13.26 | 14.0 | 28.0 | 18.67 | 32.67 | 37.3 | 50 | 23.3 | 32.7 |
Nominal diameter DN | D | D1 | L1 | L2 | D2 | H | n-d | L3 | Flange end distance | ||||||||||||
Fit type A | With Type B | With type C | With Type D | With Type A | With Type B | Pairing type C | With Type D | With Type A | With Type B | With type C | With Type D | With Type A | With Type B | With type C | With Type D | ||||||
50 | 110 | 92 | 355 | 225 | 200 | 4-14 | 120 | 60 | |||||||||||||
80 | 125 | 150 | 92 | 355 | 4-18 | ||||||||||||||||
100 | 145 | 175 | 102 | 385 | |||||||||||||||||
125 | 175 | 200 | 117 | 384 | 429 | 225 | 225 | 8 - phi 18 | 155 | ||||||||||||
150 | 200 | 225 | 130 | 397 | 442 | ||||||||||||||||
200 | 255 | 280 | 172 | 437 | 482 | 70 | |||||||||||||||
250 | 310 | 335 | 197 | 511 | 561 | 335 | 260 | 12-18 | 165 | ||||||||||||
300 | 362 | 395 | 227 | 536 | 586 | 12-23 | 80 | ||||||||||||||
350 | 412 | 445 | 252 | 561 | 611 | ||||||||||||||||
400 | 462 | 495 | 296 | 656 | 16-23 | 100 | |||||||||||||||
450 | 518 | 550 | 321 | 679 | |||||||||||||||||
500 | 568 | 600 | 346 | 704 | |||||||||||||||||
600 | 755 | 705 | 480 | 1075 | 470 | 365 | 20-25 | 120 | 150 | ||||||||||||
seven hundred | 860 | 810 | 530 | 1125 | 20-24 | ||||||||||||||||
800 | 975 | 920 | 595 | 1185 | 24 - phi 30 | 200 | |||||||||||||||
900 | 1075 | 1020 | 685 | 1280 | |||||||||||||||||
1000 | 1175 | 1175 | 735 | 1320 | 28 - phi 30 |
Suppliers with verified business licenses