• Kp-10 Quick Exhaust Valve
  • Kp-10 Quick Exhaust Valve
  • Kp-10 Quick Exhaust Valve
  • Kp-10 Quick Exhaust Valve
  • Kp-10 Quick Exhaust Valve
  • Kp-10 Quick Exhaust Valve

Kp-10 Quick Exhaust Valve

Type: Compound Exhaust Valve
Material: Stainless Steel Cast Steel Brass
Certification: RoHS, CE, ISO9001, TS16949, TUV, GS
Transport Package: Wooden Box
Specification: DN15-DN800
Trademark: XC
Customization:
Gold Member Since 2023

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
KP-10
Origin
China
HS Code
3917400000
Production Capacity
9999

Product Description

Kp-10 Quick Exhaust ValveKp-10 Quick Exhaust ValveKp-10 Quick Exhaust ValveKp-10 Quick Exhaust ValveKP-10 rapid exhaust valve is used at the highest point on the pipeline or where there is a closed air to remove the gas in the pipeline to dredge the pipeline. If no exhaust valve is installed, the pipeline will be blocked at any time, and the water capacity of the pipeline will not meet the design requirements. KP-10 rapid exhaust valve pipeline in the operation of power failure, stop pumping pipe timely negative pressure will cause pipeline vibration or rupture, exhaust (suction) valve quickly air into the pipe, to prevent pipeline vibration or rupture.
Service temperature
Room temperature
Working pressure
1.0 Mpa
Medium
Clear water

Principle of action


When the water enters the tube, the float stops in the lower part of the ball bucket for a large amount of exhaust, when the gas is discharged, the water enters the valve through the ball bucket to float the ball to close, stop the exhaust, the pipeline will naturally produce a small amount of gas when the normal operation, then the gas will be concentrated to the upper part of the tube to a considerable degree, the water in the valve drops, the float drops the gas from the hole. If there is a power outage and the pump is stopped, when the water flow in the pipe is empty, there is negative pressure at any time, the float ball drops along the water, and the small hole is opened to drive the large hole for a large amount of air to ensure the safety of the pipeline.

Technical parameters


1.
4. Body: HT200
5. Float and valve: 304 stainless steel
6. Sealing material: Buqing rubber
Specification: 25 50 80 100 150 200
Delivery pipe: 100-250 300-450 500-700 800-1000 1200-1400 1600-1800
Note: The pressure of the exhaust valve should not be lower than 0.1Mpa during use, if the exhaust valve is lower than 0.1Mpa, it is easy to leak. Must be equipped with a valve for maintenance
P-10 quick exhaust valve is suitable for the working medium of water pipeline, in order to improve the efficiency of water transmission equipment and protect the pipeline from deformation and rupture, is the necessary equipment of the pipeline. It is used in the most store or the place with closed air and the outlet of the pump on the pipeline to remove the gas in the pipeline to dredge the pipeline and achieve normal work. If the exhaust valve is not installed, the pipeline will be blocked at any time, so that the water capacity of the pipeline can not meet the design requirements; Secondly, when the pipeline is in operation, the pump stop, power failure phenomenon will produce negative pressure to cause pipeline vibration or rupture, rapid exhaust valve can quickly breathe air into the pipe to prevent pipeline vibration or rupture. Working principle
When there is air in the system, the gas gathers in the upper part of the quick exhaust valve, the gas accumulates in the valve, the pressure rises, when the gas pressure is greater than the system pressure, the gas will make the water surface in the chamber drop, the float drops with the water level, and the exhaust port is opened; After the gas exhaust, the water level rises, the float also rises, and the exhaust valve stops venting. Performance action
In the operation of the pressure pipeline, the quick exhaust valve can automatically exclude a small amount of air precipitated from the water so as not to block the water. When the negative pressure occurs in the pipeline, the air can be quickly admitted, so as to avoid the instability and damage of the pipeline due to excessive negative pressure. When the pipeline is emptying, it can automatically take in a large amount of air to speed up the water release and shorten the water shutdown time. Structural features
1, can eliminate the gas in the pipeline, feed resistance, save energy.
2, the exhaust capacity is many times of the ordinary double-port exhaust valve.
3. When the pipeline is under negative pressure, this product can quickly and automatically inhale to prevent the pipeline from breaking.
4, float is stainless steel, long service life, safe and reliable.


Kp-10 Quick Exhaust ValveKp-10 Quick Exhaust ValveKp-10 Quick Exhaust ValveKp-10 Quick Exhaust ValveKp-10 Quick Exhaust ValveKp-10 Quick Exhaust Valve

Kp-10 Quick Exhaust Valve

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now