Gj41X

• Media: Water
• Temperature: High Temperature
• Actuator: Electric
• Connection: Flanged Diaphragm Valve
• Material: Cast Steel
• Structure: Roof Type Diaphragm Valve
• Model NO.: GJ41X
• Pressure: High Temperature
• Flow Direction: Reversing
• Function: Solenoid Valve, Electronic Type, Intelligent Type, Field Bus
• Usage: Safety, Emptying, Drain, Temperature Control, Flow Control
• Standard: DIN, GB, ANSI, BSW, JIS
• Transport Package: Wooden Box
• Specification: DN15-DN800
• Trademark: XC
• Origin: China
• HS Code: 8481804090
• Production Capacity: 9999

Product Description

Valve type: Ao liner clamp valve;

Valve model :GJ41X;

Size specification :DN25-600mm;

Installation form: flange type;

Pressure rating :1.6MPa;

Main material: cast steel WCB, carbon steel CS, stainless steel 304,316, etc., Product supplier: Shanghai Pudie;



Product details picture: Working principle: Manual Ao liner clamp valve GJ41X when turning the hand wheel, the size of the valve stem at the same time drive the upper and lower ram, compression tube sleeve, to close, reverse the line open, so that the ram between the guide post up and down reciprocating to complete the valve opening and closing work.


It can see the working process on the outside, avoid internal leakage and external leakage, and facilitate the cleaning work. It replaces the stainless steel clamp, and ends the history of using ball valve plug valve or other valves.


Product category: GJ41X flanged Ao liner pinch valve, GJ641X pneumatic Ao Liner pinch valve, GJ941X electric Ao Liner pinch valve.


GJ41X Flange Ao liner pinch valve performance specification: pressure grade :PN6, PN10;



Temperature range :≤80ºC;

Body bracket: cast iron;

Hose material: braided rubber;

Medium used: pulp, liquid abrasive, dry and wet granular mixture and general corrosive medium;

Scope of application: chemical industry, petroleum, power generation, alkali plant, mineral processing, cement, coal preparation, non-metal and other industries, can quickly control pipe concentration sand granular flow and cut-off.


Manual Ao liner clamp valve GJ41X installation and maintenance: Insert the plastic pipe extending out of the ground below the electric contact trough into the small valve end hose, the other end insert the plastic pipe supplied by our factory, the outlet extends to the electric contact trough and then tighten the two ends with copper wire or stainless steel hoops.



For a long time to use, if there is wear or leakage, as long as the left and right valve body to replace the tube sleeve, the valve can be used for a long time.