CS817h Sanitary Thermostatic Trap

• Media: Water
• Temperature: High Temperature
• Material: Stainless Steel
• Connection Form: Flange
• Structure: Tubular
• Pressure: High Temperature
• Model NO.: cs817H
• Function: Ddcv Double Lobe, Nrvr Silence, Sfcv Rubber Lobe, Nrvz Silence, Nrvg Silence
• Sealing Form: Bellows Globe Valve
• Flow Direction: Reversing
• Standard: GB
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Transport Package: Wooden Box
• Specification: DN15-DN800
• Trademark: XC
• Origin: China
• HS Code: 8481804090
• Production Capacity: 9999

Product Description

Sanitary thermostatic trap (also known as sanitary thermostatic trap) uses the temperature difference between steam and cold water to cause the deformation or expansion of the temperature sensing element to drive the spool to open and close the valve.
The supercooling degree of the sanitary thermostatic trap is relatively large, the general supercooling degree is 15-40 degrees, it can use a part of the sensible heat of the cold and clean water, there is always high temperature cold and clean water before the valve, no steam leakage, energy saving. It is the most ideal trap in the steam pipeline, heat tracing pipeline, small heating equipment, heating equipment, small heating equipment with low temperature requirements.
Sanitary thermostatic trap temperature sensing element for bimetal sheet (carbide metal sheet), with the steam temperature rise and fall by heat deformation, push the spool switch valve. The use temperature can be adjusted according to needs (order the use of temperature, adjust the delivery of the factory). General undercooling adjustment range below saturation temperature 15ºC-30ºC, back pressure rate is greater than 70%, can discharge non-condensing gas, not afraid of freezing, small size, can resist water hammer, high pressure resistance, any position can be installed.
When the device has just started, there is low-temperature condensate in the pipeline, the bimetal sheet is flat, the spool is in the spring's elastic force, and the valve is in the open position.
When the condensate temperature gradually rises, the temperature sensing element of the bimetal plate begins to bend and deform, and pushes the valve core to the closed position. Before the condensate reaches saturation temperature, thermostatic traps around the world begin to close. The bimetal plate changes with the steam temperature to control the valve switch, blocking steam drainage.
The temperature sensing metal steam trap has two forms of thread and quick mounting. Equipped with * alloy pressure balance temperature sensing element, it is an ideal discharge device for radiator, steam tracing pipe network, instrument tracing, small heat exchanger, individual heating unit and steam exhaust valve. The disc and seat can be replaced online.
The trap is used in sanitary grade clean steam pipeline. The whole inside and outside of the valve is made of stainless steel; The inner cavity and the outer surface of the high precision mirror polishing treatment, to meet the requirements of the health industry.
The definition of Xuancheng sanitary thermostatic trap:
1, compact structure, light weight, reduce installation costs.
2, its structure does not allow the discharge of the stay; When the steam equipment is shut down or the pipeline is cooled, the low-temperature cold junction water in the pipeline is emptied in time to reduce the next preheating time, which can effectively avoid the effect of freezing.
3. Quickly discharge water and air when steam begins to enter.
4, there is no steam leakage because the switch of the disc is 100 ° C or lower, saving temperature.
5, not limited by the installation position Angle (horizontal, vertical, tilt, etc.), easy to install.
Product name: sanitary thermostatic trap
Product Model: bach-a
Drive mode: automatic
connection form: thread, quick installation
structure: thermostatic
sealing structure: hard seal
pressure range: 1.0MPa
Nominal diameter: DN15-32
Commonly used material: stainless steel
Standard:
Standard for valve size :DIN EN558-2005
Valve test standard :DIN EN12266-1-2003
Valve delivery standard :DIN3230-2-1974
Industrial valve standard :DIN EN 1171-2003
Flange valve standard :DIN EN 3202-1977
Standard for welded valves :DIN EN 3202-1982
Clamping valves :DIN EN 3202-1979
Valve with internal thread connection :DIN EN 3202-1977
Available in :API, ANSI and other standards
Sanitary thermostatic trap (also known as sanitary thermostatic trap) is the use of steam and cold clean water temperature difference caused by the deformation of the temperature element or expansion to drive the spool to open and close the valve.
The supercooling degree of the sanitary thermostatic trap is relatively large, the general supercooling degree is 15-40 degrees, it can use a part of the sensible heat of the cold and clean water, there is always high temperature cold and clean water before the valve, no steam leakage, energy saving. It is the most ideal trap in the steam pipeline, heat tracing pipeline, small heating equipment, heating equipment, small heating equipment with low temperature requirements.
Sanitary thermostatic trap temperature sensing element for bimetal sheet (carbide metal sheet), with the steam temperature rise and fall by heat deformation, push the spool switch valve. The use temperature can be adjusted according to needs (order the use of temperature, adjust the delivery of the factory). General undercooling adjustment range below saturation temperature 15ºC-30ºC, back pressure rate is greater than 70%, can discharge non-condensing gas, not afraid of freezing, small size, can resist water hammer, high pressure resistance, any position can be installed.
When the device has just started, there is low-temperature condensate in the pipeline, the bimetal sheet is flat, the spool is in the spring's elastic force, and the valve is in the open position.
When the condensate temperature gradually rises, the temperature sensing element of the bimetal plate begins to bend and deform, and pushes the valve core to the closed position. Before the condensate reaches saturation temperature, thermostatic traps around the world begin to close. The bimetal plate changes with the steam temperature to control the valve switch, blocking steam drainage.
The temperature sensing metal steam trap has two forms of thread and quick mounting. Equipped with * alloy pressure balance temperature sensing element, it is an ideal discharge device for radiator, steam tracing pipe network, instrument tracing, small heat exchanger, individual heating unit and steam exhaust valve. The disc and seat can be replaced online.
The trap is used in sanitary grade clean steam pipeline. The whole inside and outside of the valve is made of stainless steel; The inner cavity and the outer surface of the high precision mirror polishing treatment, to meet the requirements of the health industry.
The definition of Xuancheng sanitary thermostatic trap is:
1, compact structure, light weight, reduce installation costs.
2, its structure does not allow the discharge of the stay; When the steam equipment is shut down or the pipeline is cooled, the low-temperature cold junction water in the pipeline is emptied in time to reduce the next preheating time, which can effectively avoid the effect of freezing.
3. Quickly discharge water and air when steam begins to enter.
4, there is no steam leakage because the switch of the disc is 100 ° C or lower, saving temperature.
5, not limited by the installation position Angle (horizontal, vertical, tilt, etc.), easy to install.
Product name: sanitary thermostatic trap
Product Model: bach-a
Drive mode: automatic
connection form: thread, quick installation
structure: thermostatic
sealing structure: hard seal pressure
range: 1.0MPa Nominal diameter: DN15-32
Commonly used material: stainless steel

Standard:
Standard for valve size :DIN EN558-2005
Valve test standard :DIN EN12266-1-2003
Valve delivery standard :DIN3230-2-1974
Industrial valve standard :DIN EN 1171-2003
Flange valve standard :DIN EN 3202-1977
Standard for welded valves :DIN EN 3202-1982
Clamping valves :DIN EN 3202-1979
Valve with internal thread connection :DIN EN 3202-1977
Available in :API, ANSI and other standards